2012 SEM XII International Congress & Exposition on Experimental and Applied Mechanics

Abdi, F.
177	Simulation of Indentation Process in HoneyComb/Qusi-isotropic Sandwich Panels
Abed, F.
437	Effect of Microstructures on Dynamic Localization in Structural Steel
Abolfathi, N.
98	A Novel Method to Investigate Cell Force Respone
Abraham, C.
129	Hole-drilling Residual Stress Measurement in an Intermediate Thickness Specimen
Absi, J.
397	Experimental Characterisation of Integral Invariants in Wood Specimen Using the Full Field Optical Technique
Abudaram, Y.J.
109	A Novel Method to Control Pretension in Membrane Wing Micro Air Vehicles
Abuzaid, W.
227	Relating Strain Fields and Microstructural Factors in Fatigue Crack Growth
Achuthan, A
330	Correlation Between Mechanical Properties And Structural Features In Nanostructured Metals
Achuthan, A.
438	Deformation & Stability of Nanostructured Metals: A Computational Study
Ackers, S.A.
435	Investigation of the Effect of Damage on the Mechanical Response of Salem Limestone at Subjected to Quasi-static and High Rate
Adam, L.
53	Non-local Damage-enhanced MFH for Multiscale Simulations of Composites
Adams, C.D.
65	Cyclic Plasticity Under Shock Loading in an HCP Metal
Adhikari, S.
136	An Opto-Acoustic Technique for Evaluation of Adhesion Strength of Nano-scale Systems
Adrien, J.
84	Artifact Correction for DVC Measurements Using A Laboratory X-ray Source
Alagappan, P.
402	A Gibbs Potential Based Implicit Approach for Modeling Viscoelastic Solids
Albahadily, F.
409	Evaluation of Composite Bone Cement for Orthopedic Applications
Albertani, R.
331	Correlation of Structural Strain to Tip Vorticity and Lift for a MAV Pliant Membrane Wing
Alemayehu, F.M.
375	Uncertainty in the Dynamics of Gear-pair Fatigue and Fracture
Alexander, C.S.
55	Pressure-shear Loading of Granular Materials
Ali, H.
110	Determining the Dynamic Response of Luminescent Photoelastic Coating
Alkhader, M.
262	Experimental Investigation of Failure in Viscoelastic Elastomers Under Combined Shear and Pressure
Allahkarami, M.
173	Finite Elements Model Generation Based on Stochastic Analysis on AFM Images
Allen, B.L.
210	A Versatile Microelectromechanical System for Fatigue Testing of Nanostructures
Aluru, N.R.
317	Multiscale Modeling of Mechanoresponsive Polymers
Amiri, A.A.
118	Fully Reversed Four Point Bending Tests of Carbon Fiber Composite
Amirkhizi, A.V.
245	Polyurea-based Composites: Ultrasonic Testing and Dynamic Mechanical Properties Modeling
335	Shock Wave Interaction With Periodic Obstacles
An, Z.
476	Nanoscale Investigations of the Chemo-mechanics of Crosslinking Molecules in CNT Based Nanocomposites
Andzelm, J
468	Polymer Gels for Defense Applications
Antoun, B.R.
106	Temperature Dependent Ductile Material Failure Constitutive Modeling With Validation Experiments
390	Detailed Measurements of Thread Deformation and Failure in Thin Walled Aluminum Alloy Joints
217	Thermal Infrared Imaging to Study Microstructural Damage and Failure in Aluminum Alloys
Anvari, B.
321	Effects of Membrane Composition and Cytoskeletal Proteins on Membrane Mechanics
Aradhya, S.V.
289	Simultaneous Measurement of Force and Conductance across Single Molecule Junctions
Aref, A.J.
428	Wave Propagation Characteristics in Layered Structures With Time Dependent Materials
Armanios, E.
429	Apparatus and Method for Pure Bending Test of Coupled Composites
Armiger, R.A.
296	Determination of Simple Shear Material Properties of the Brain at High Strain Rates
Arshad, S.N.
426	The Role of Mineral Content on the Mechanical Behavior Biomimetic Nanofibers
Arzoumanidis, G.A.
303	A Thermodynamic State Driven Nonlinear Viscoelastic Constitutive Model
282	Novel High Resolution Sensor Concept
Avachat, S.
446	Dynamic Response of Submerged Sandwich Structures to Underwater Impulsive Loading
Awasthi, A.
250	An Experimental Study on the Wave Propagation Behavior in a 2-D Granular Medium
Baccar, MH.
153	Experimental and Numerical Approach to the Phenomenon of High Speed Milling of Titanium Alloy (TA6V)
Backman, D.
234	The Effect of Riveting on the Fatigue Life of Fiber Metal Laminate Zero Load Transfer Joints
Bae, I.-T.
430	Radial Mechanical Properties of Boron Nitride Nanotubes
Baeker, M.
62	Dynamic Behavior and Numerical Modeling of titanium 15-3-3-3 Alloy
Bailey, A.M.
26	Injury Potential of Shock Induced Compressive Waves on Human Bone
Baker, M.S.
509	Contamination Thresholds of Pt- and RuO2-coated Microrelays
Balandraud, X.
60	Application of Full-field Measurements to Analyze the Thermo-mechanical Response of a three-branch rubber specimen
Bale, H.A.
173	Finite Elements Model Generation Based on Stochastic Analysis on AFM Images
Ballenger, C.
409	Evaluation of Composite Bone Cement for Orthopedic Applications
Bamidele, J.
253	Toggling Bistable Atoms via Mechanical Switching of Bond Angle
Bammann, D.J.
143	Formulation and Validation of a Thermomechanical Viscoelastic/viscoplastic Constitutive Model for Amorphous Glassy Polymer
142	Formulation a Thermomechanical Internal State Variable Constitutive Model for Elastomers
Bandini, M.
46	Very High-cycle Fatigue Resistance of Shot Peened High-Strength Aluminum Alloys
Bandla, S.
267	Nanotomography of Polymer Nanocomposite Nanofibers
Banks-Sills, L.
24	Delamination Toughness Tests of DCB Specimens Composed of Woven Composites
Barbosa, III., N.
15	MEMS Device for Fatigue Testing 25 Micrometer Thick Aluminum Specimens
Bar-Cohen, Y.
28	Humanlike Robots as the Ultimate Challenge to Mimicking Biology in a Synthetic Form
Bardelcik, A.
278	High Strain Rate Characterization of AZ31B Magnesium Alloy Sheet
Barile, C.
463	Hybrid Characterization of Laminated Wood With ESPI and Optimization Methods
Barsoum, R.G.S.
469	Elastomeric Polymers for Shockwave Mitigation and Extreme Loading Conditions
Barthelat, F.
290	Direct Measurements of the Cohesive Behavior of Soft Biological Interfaces
273	Scalation Pattern Increases Penetration Resistance of Striped Bass Fish Skin
236	Biomimetic Tapered Fibers for Enhanced Composite Toughness
239	Interfacial Fracture Toughness of Nacre
Bartholomew, B.
470	Thermal and Stress Analyses of Dental Ceramic Restorations
Barton, N.R.
324	Synchrotron X-ray Diffraction: Forward Modeling of Intragranular Misorientation Evolution
Baskaran, S
281	Design of Ultrasonic Probe Configuration Using Finite-difference Time-domain Simulations
Baumert, E.K.
249	Environmental Effects on Fatigue Crack Initiation for LIGA Ni Thin Films
Baur, J.
150	Viscoelastic Creep of Vertically-aligned Carbon Nanotubes
Baur, J.W.
241	Relaxation and Recovery Behavior of an Epoxy Based Shape Memory Polymer Resin
Bayly, P.V
209	The Effects of Noise and Apatial Sampling on Identification of Material Parameters by Magnetic Resonance Elastography
Bayly, P.V.
352	Mechanical Properties of Murine Glioma Measured with Magnetic Resonance Elastography
Bayraktar, E.
153	Experimental and Numerical Approach to the Phenomenon of High Speed Milling of Titanium Alloy (TA6V)
163	Design of Elastomeric Matrix Composites: Influence of the Vulcanizing Agent System and the Temperature of Vulcanization on the Mechanical Properties
162	Low Velocity Impact Behaviour of the Epoxy Matrix Composites Reinforced With Metallic and Oxide Particles
99	Production of Metal Matrix Composites Using Thixoinfiltration Techniques
Beaubier, B.
213	CAD-based Calibration of a 3D DIC System
Beiermann, B.A.
317	Multiscale Modeling of Mechanoresponsive Polymers
Beliveau, A.L.
332	In Situ Dynamics of Electronics Assemblies Under Shock
Belkassem, B.
260	Optimized Patterns for Digital Image Correlation
Ben Azzouna, M.
259	Modified Constitutive Relation Error Strategy for Elastic Properties Identification
Ben Salem, S.
153	Experimental and Numerical Approach to the Phenomenon of High Speed Milling of Titanium Alloy (TA6V)
Benedetti, M.
46	Very High-cycle Fatigue Resistance of Shot Peened High-Strength Aluminum Alloys
Benedetti, M.B.
102	Measurement of Metallic Adhesion Force-to-elongation Profile Under High Strain-rate Conditions
Benjamin, C.
322	Substrate Adhesion of Responsive Hydrogels
Bennett, B.C.
26	Injury Potential of Shock Induced Compressive Waves on Human Bone
Berfield, T.A.
365	Thermal Failure Analysis of PZT Thin Films Using Digital Image Correlation
367	Mechanical Behavior of Bi-stable Buckled MEMS for Actuation and Energy Harvesting
Berger, H.
7	Representative volume element analysis of light weight carbon nanotubes embedded piezoelectric fibre composites
Bergers, L.I.J.C.
405	Enriched Digital Image Correlation to Characterize Geometrically Non-ideal Microbeams
Bernier, J.V.
324	Synchrotron X-ray Diffraction: Forward Modeling of Intragranular Misorientation Evolution
Berthout, G.
163	Design of Elastomeric Matrix Composites: Influence of the Vulcanizing Agent System and the Temperature of Vulcanization on the Mechanical Properties
Besnard, G.
213	CAD-based Calibration of a 3D DIC System
Bester, J.N.
76	Plasticity and Ballistic Characterization of a new Armour Steel.
Beuth, J.L.
510	Quantifying Size Effects in Polysilicon Using an In-situ On-chip Test Platform
Bhat, A.R.
299	Performance Evaluation of a Composite Armor Concept by Ballistic Testing and FEA
Bhattacharya, K.
343	Experimental Methods for Validation of Multiscale Plasticity Models
Bigger, R.P.
363	A New Technique for Monitoring Inhomogeneous Deformation during Flyer Plate Impact
Billardon, R.
213	CAD-based Calibration of a 3D DIC System
Billon, N.
77	New Thermo-mechanical Modelling for Visco Elastic, Visco Plastic Polymers
Bless, S.
256	Effect of Grain Size on High Strain Rate Response in Granular Soils
Blocher, D.B.
215	Frequency Multiplication and Demultiplication in MEMS
Boccaccio, A.
123	Recent Developments in the Contouring of Surfaces
Bodelot, L.
343	Experimental Methods for Validation of Multiscale Plasticity Models
Booker, J.D.
37	Simulation of Interference Fitted Joint Strength as Used in Hot Rolling Work Rolls
124	Modelling of Nosing for the Assembly of Aerospace Bearings
Borla, O.
138	Time Correlation of Acoustic, Electromagnetic and Nuclear Emissions in Rocks Under Compression
Boron, K.
286	Utilizing Knots to Reduce Dynamic Loads in Fire Service Rope Systems
Bortoluzzi, D.B.
102	Measurement of Metallic Adhesion Force-to-elongation Profile Under High Strain-rate Conditions
Boruah, S.
26	Injury Potential of Shock Induced Compressive Waves on Human Bone
Bossuyt, S.
260	Optimized Patterns for Digital Image Correlation
Bouamoul, A.
164	Impact Response of Ballistic Gelatin
Bouchair, A.
144	Simplified Calculation Method of the Torsion Effect on the Seismic Behavior of Timber Buildings
141	Experimental Analysis of the Semi-rigidity Joint in the Standardized Timber Beam
Bouchard, P.J.
457	Determination of Local Creep Properties in Weldments
Boujelbene, M.
153	Experimental and Numerical Approach to the Phenomenon of High Speed Milling of Titanium Alloy (TA6V)
Boulet, T.
449	Brain Mechanical Imaging (BMI)
Bouvard, J.L.
142	Formulation a Thermomechanical Internal State Variable Constitutive Model for Elastomers
143	Formulation and Validation of a Thermomechanical Viscoelastic/viscoplastic Constitutive Model for Amorphous Glassy Polymer
Bouvier, S.
480	Full-field Strain Measurement Using Microlithography and Image Correlation
Boyce, B.L.
307	Influence of Grain Structure and Doping on the Fracture of Polycrystalline Silicon
108	Evaluation of Microstructure-slip Relationships in BCC Tantalum
Boyd, S.W.
348	Localised Through-thickness Load Transfer Within Adhesively Bonded Composite Joints
Braga, A.M.B.
300	Use of Fiber Optic Strain Gages in Pipeline Specimens Repaired With Composite Systems
Brand, V.
509	Contamination Thresholds of Pt- and RuO2-coated Microrelays
Braun, P.V.
337	Molecular Tailoring of Interfacial Adhesion Using Self-assembled Monolayers
Brinkmeyer, A.W.
404	Morphing Composite Panel with Pseudo-bistable Viscoelastic Behavior
Broadfoot, S.W.
255	Dynamic Contact Mechanics of Geologic Materials: Experiments, Modeling and Applications.
Bronkhorst, C.A.
212	Influence of Loading Kinetics on the Shock Response of Polycrystalline Copper.
Brown, B. W.
268	A Comparison of Residual Stress Measurements on Linear Friction Welds Using the Contour Method and Neutron Diffraction
Brown, E.N.
433	Inverse Measurement of Compliance by the Normalization Technique for J-integral Fracture Toughness
111	Large-strain Time-temperature Equivalence and Adiabatic Heating of Polyethylene
113	Incipient and Progressive Damage in Polyethylene Under Extreme Tensile Conditions
Brownell, W.E.
321	Effects of Membrane Composition and Cytoskeletal Proteins on Membrane Mechanics
Budhoo, Y.
13	Effect of Low Temperatures on the Ballistic Limit of Hybrid Woven Composites
14	Ballistic Impact on Woven Glass/Epoxy Composites at High and Low Temperatures
Buffiere, J.Y.
84	Artifact Correction for DVC Measurements Using A Laboratory X-ray Source
100	3D Analysis of a Fatigue Crack in Cast Iron Using Digital Volume Correlation of X-ray Tomographic Images
Byer, C.M.
238	Experiments and Modeling of Microcompression of Single-crystal Magnesium
Cady, C.M.
111	Large-strain Time-temperature Equivalence and Adiabatic Heating of Polyethylene
Calixto, S.A
73	Digital Holographic Microscopy by Mirau Interferometric Objective
Canfield, T.R.
65	Cyclic Plasticity Under Shock Loading in an HCP Metal
Cao, Z.
387	Molecular Adhesion
501	Opto-mechanical Characterization of a MEMS Sensor for Real-time Infrared Imaging
Carazo Álvarez, D.
261	Photoelasticity Testing and FE Modeling of T-Stub Model
Carazo Álvarez, J.D.
261	Photoelasticity Testing and FE Modeling of T-Stub Model
Cardoso, S.
252	Detection of Damage of Epoxy Composites Using Carbon Nanotube Network
Carey, N.L.
232	Blast Testing of Four Types of Panels With External Strengthening Systems
Cargile, J.D.
435	Investigation of the Effect of Damage on the Mechanical Response of Salem Limestone at Subjected to Quasi-static and High Rate
Carlson, T.A.
414	Processing, Microstructure, and Properties of Carbon Nanotube Reinforced Silicon Carbide
Carneal, C.M.
296	Determination of Simple Shear Material Properties of the Brain at High Strain Rates
Carpenter, T.J.
331	Correlation of Structural Strain to Tip Vorticity and Lift for a MAV Pliant Membrane Wing
Carpick, R.W.
283	Characterizing the Wear of Diamond Like Carbon Atomic Force Microscope Probes
Carpinteri, A.
121	Absorbed vs. Released Energy in the Cracking Process of Heterogeneous Materials Under Compression
199	Damage Assessment in Syracuse Limestone Specimens by Frequency Analysis of Elastic Emissions
138	Time Correlation of Acoustic, Electromagnetic and Nuclear Emissions in Rocks Under Compression
Carroll, J.D.
108	Evaluation of Microstructure-slip Relationships in BCC Tantalum
227	Relating Strain Fields and Microstructural Factors in Fatigue Crack Growth
Casavola, C.
460	Calibration of Barkhausen Noise
463	Hybrid Characterization of Laminated Wood With ESPI and Optimization Methods
274	Application of Contouring to Dental Reconstruction
461	Analisys of Strain's Error on Residual Stresses Calculated by HDM
Casem, D.T.
455	Wave Separation in a Polymeric Kolsky Bar
Casperson, M.
227	Relating Strain Fields and Microstructural Factors in Fatigue Crack Growth
Cassenti, B.N.
381	The Application of the Combined Creep and Rate-independent Plasticity Model to Turbine Components Life Prediction
Castro-Ceseña, A.B.
315	Bioinspired Fabrication of a Bone-like Composite
Caulk, J.A.
332	In Situ Dynamics of Electronics Assemblies Under Shock
Cavalli, M.N.
118	Fully Reversed Four Point Bending Tests of Carbon Fiber Composite
Cerreta, E.K.
313	Effect of Temperature on Texture Evolution in Tantalum During Dynamic-extrusion
218	Aluminum and Magnesium Alloy Penetration Damage
212	Influence of Loading Kinetics on the Shock Response of Polycrystalline Copper.
Chabal, Y.J.
386	Fracture Between Short Molecules
Chai, G.B.
180	Impact Behavior of Aluminum, Laminates, Fiber-metal Laminates and Sandwich Plates
Chakravarthy, V.
226	Study of Damage Evolution During Fatigue of Composites Using DIC
Chalivendra, V.B.
252	Detection of Damage of Epoxy Composites Using Carbon Nanotube Network
Chandrasekar, S.
276	Visualization of Material Flow in Machining and Sliding Indentation Processes
336	Boundary Layers at Sliding Interfaces
Chandru, H.P.
202	A Digital Gradient Sensing (DGS) Method for Evaluating Stress Gradients in Transparent Armor Materials at Elevated Rates of Loading
Chang, K.T.
285	Fabrication and Analysis of Small Flapping Wings
Chasiotis, I
221	Molecular Weight, Length Scale, and Strain Rate Effects on Necking and Strain Hardening of Polystyrene Nanofibers
Chasiotis, I.
426	The Role of Mineral Content on the Mechanical Behavior Biomimetic Nanofibers
307	Influence of Grain Structure and Doping on the Fracture of Polycrystalline Silicon
Chaudhuri, A.
285	Fabrication and Analysis of Small Flapping Wings
Chazal, C.
140	Stress Intensity Factors for Axisymmetric Problems in Viscoelastic Orthotropic Materials
Chen, C.
201	Experimental Characterization and Modeling of the 2024-T3 Aluminum Alloy Under Close-In Blast Loading
Chen, C.C.
298	Impulse Plug Measurements of Blast Reflected Impulse at Close Range
Chen, C.Q.
309	Failure Mechanisms in Aluminum Nitride Under Planar Shock Loading
Chen, C.T.
78	Failure Characterization of AA 2024 T3 Panel Subjected to Close-In Blast
Chen, R.
155	Experimental Study on Dynamic Mechanical Properties of a Mock PBX
223	XDT of a PBX Under Low Amplitude Impact
Chen, S.R.
65	Cyclic Plasticity Under Shock Loading in an HCP Metal
Chen, T.P.
10	Microstructure in the FSW Butt Joint of Aluminum Alloy AA5083
Chen, T.Y.-F.
362	An Instantaneous Phase Shifting Digital Shearography System for Dynamic Measurement
Chen, W.
366	Mechanical Response of Polycarbonate Nano-Silicate Composites as a Function of Strain Rate and Weight Percent of Clay Loading
156	What Makes Silly Putty© Bounce?
242	Experimental Investigation on Dynamic Behavior of Ultra High Performance Composite Concrete with Kolsky Bar
292	Kolsky Tension bar for Samples With Very low Strength
243	Verification of Penetration Equation by Experimental Investigation on Penetration into Wax
168	Inertia Effects in High-rate Compression Experiments of Soft Materials
Chen, W.W.
358	Dynamic Tri-axial Compression Experiments on Cor-tuf
Chen, X.-M.
432	Direct Measurement of the Interfacial Strength of PMMA-CNT Interface
430	Radial Mechanical Properties of Boron Nitride Nanotubes
Chen, Y.
208	Hardening Behavior of Thin Wires Under Loading With Strain Gradients
chen, Y.C.
362	An Instantaneous Phase Shifting Digital Shearography System for Dynamic Measurement
Cheng, J.T.
491	3D Deformations and Shape Measurements of Tympanic Membranes by Multi-wavelength Lensless Digital Holography
Cheng, S.
161	An Explanation for why Some Polymers are Ductile and Others Brittle
Cheng, T.
489	Digital Holographic Otoscope for Measurements of the Human Tympanic Membrane in-vivo
CHENG, X.X.
96	Film Residual Stress Assessment via Temporarily Thermal Relaxation
Chiang, C.C.
190	High Strain Rate Characteristics of Fiber Bragg Grating Strain sensors
Chiang, F.P.
464	Combined Effects of Sea Water and UV Radiation on the Mechanics of Fiber Reinforced Vinylester Composites
Chiappini, G.
369	Comparison of Contouring Techniques Applied to Sheet Metal Testing
Chiarito, V.P.
156	What Makes Silly Putty© Bounce?
Chien, C.H.
119	Thickness Effects on the Thermal Expansion Coefficient of ITO/PET Film
Chindhy, S.
322	Substrate Adhesion of Responsive Hydrogels
Chocron, S.
363	A New Technique for Monitoring Inhomogeneous Deformation during Flyer Plate Impact
Chona, R.
227	Relating Strain Fields and Microstructural Factors in Fatigue Crack Growth
Chowdhuri, M.A.K.
235	Application of a New Experimental Method to Determine Bi-material Interface Bonding Strength
Christopher, J.J.
26	Injury Potential of Shock Induced Compressive Waves on Human Bone
Chuang, M.-C.
146	The Time Dependent Mechanical Properties of Bovine Enamel
Churnside, A.B.
114	A Precision Force Microscope for Biophysics
Clarke, S.A.
359	Ultra-high Speed Imaging for Explosive-driven Shocks in Polymers
Clausen, B.
268	A Comparison of Residual Stress Measurements on Linear Friction Welds Using the Contour Method and Neutron Diffraction
453	Mapping the Triaxial Residual Stress in a Nuclear Reactor Nozzle
Clavette, P.L.
23	Probabilistic Characterization of Elastic Properties of Composites Using Digital Image Correlation Technique
Clayton, E.
209	The Effects of Noise and Apatial Sampling on Identification of Material Parameters by Magnetic Resonance Elastography
Clayton, E.H.
352	Mechanical Properties of Murine Glioma Measured with Magnetic Resonance Elastography
Clements, B.
112	Moderate Velocity Ball Impact of a Mock High-explosive
Clouet, B.
79	New Composite Timbers, Full Field Analysis of Adhesive Behavior
Cole, D.M.
255	Dynamic Contact Mechanics of Geologic Materials: Experiments, Modeling and Applications.
Collins, P.J.
488	Etching Silicon Dioxide for CNT Field Emission Device
Conklin, J.W.K.
102	Measurement of Metallic Adhesion Force-to-elongation Profile Under High Strain-rate Conditions
Connesson, N.
209	The Effects of Noise and Apatial Sampling on Identification of Material Parameters by Magnetic Resonance Elastography
Considine, J.M.
288	Improved Instrumented Indentation of Soft Materials through Surface Deformation Measurements
Conway, A.
178	A Study on Damage-induced Behavior of Bonded PI-/T-joints Using Digital Image Correlation (DIC) and FE Modeling
511	Comparison of FE and DIC Measurements of a Pi-joint Using Feature Vectors
Conway, M.L.
110	Determining the Dynamic Response of Luminescent Photoelastic Coating
Cook, R.F.
216	High Confidence Level Calibration for AFM Based Fracture Testing of Nanobeams
Cooper, R.C.
400	Mechanics of Graphene and Other Two-dimensional Materials
Cooper, W.
310	Dynamic Compressive Behavior of Moist Sorted Sand at High Strain Rates
Cooper, W.L.
11	Effect of Particle Size on the Compressive Behavior of Dry Sand under Confinement at High Strain Rates
Coppieters, S.
38	Accurate Measurement of High Strain Gradients in Micro-strain Applications With Digital Image Correlation
191	Multi-axial Quasi-static Strength of a Clinched Sheet Metal Assembly
Corrado, M.
121	Absorbed vs. Released Energy in the Cracking Process of Heterogeneous Materials Under Compression
Costanzo, F.
206	An Immersed Finite Element Method Approach to Brain Biomechanics
Cotter, P.A.
441	Measurements of Multistate Folding in a Single Beta-helical Protein
Coutu Jr., R.A.
488	Etching Silicon Dioxide for CNT Field Emission Device
487	Silicon Carbide High Temperature MEMS Capacitive Strain Sensor
485	Characterizing Resistive, Inductive, and Capacitive Loads for Micro-switches
486	Variable Resistance Through MIT Materials
484	Surface Micromachined Contact Support Structure for Microswitch Lifecycle Testing
Crammond, G.
348	Localised Through-thickness Load Transfer Within Adhesively Bonded Composite Joints
Crompton, M. J.
107	An Approach to Strain Measurement Uncertainty for DIC Using the SPOTS Calibration Procedure
Crone, W.C.
322	Substrate Adhesion of Responsive Hydrogels
Cronin, D.S.
26	Injury Potential of Shock Induced Compressive Waves on Human Bone
164	Impact Response of Ballistic Gelatin
382	High rate and shock characterization of polymeric closed-cell foams
Crosby, Z.K.
435	Investigation of the Effect of Damage on the Mechanical Response of Salem Limestone at Subjected to Quasi-static and High Rate
Crump, D.A.
350	Investigating High Strain Rate Behaviour of Foams Using DIC
Cui, X.
420	Mechanics and Applications of Light-Activated Polymers
Cusatis, G.
116	Discrete Modeling of Penetration Into Ultra High Performance Concrete
Dai, L
150	Viscoelastic Creep of Vertically-aligned Carbon Nanotubes
Daly, S.
160	Deformation Mapping at the Microstructural Length Scale
166	The Effect of Texture on Superelasticity in Nickel-Titanium
D'Amato, M.
420	Mechanics and Applications of Light-Activated Polymers
Daniel, I.M.
233	Characterization and Modeling of Polymeric Matrix Under Static and Dynamic Loading
Danis, M.
79	New Composite Timbers, Full Field Analysis of Adhesive Behavior
Dannemann, K.A.
363	A New Technique for Monitoring Inhomogeneous Deformation during Flyer Plate Impact
Danner, B.L.
486	Variable Resistance Through MIT Materials
Danza, R.
253	Toggling Bistable Atoms via Mechanical Switching of Bond Angle
Daraio, C
91	Dynamics of Multilayered Structures of VACNTs With Metallic Inter-layers
Daraio, C.
72	Stress Wave Propagation in Highly Nonlinear Two-dimensional Granular Crystals
51	Experimental Testing of Micro-particles Collision
80	Topology Optimization in Highly Nonlinear Granular Crystals with Spherical Intruders
Dargush, G.F.
428	Wave Propagation Characteristics in Layered Structures With Time Dependent Materials
Davidson, B.D.
327	Compression After Impact of Thick Composite Sandwich Structures
Davison, C.A.
88	Camera Synchronization Issues in Videogrammetric Tracking of Position and Acceleration
89	Materials and Techniques for Reduction of Vibration Transmission in String Trimmers
De Baere, I.
38	Accurate Measurement of High Strain Gradients in Micro-strain Applications With Digital Image Correlation
de Boer, M.P.
509	Contamination Thresholds of Pt- and RuO2-coated Microrelays
510	Quantifying Size Effects in Polysilicon Using an In-situ On-chip Test Platform
Debruyne, D.
63	Uncertainty Assessment of DIC Under Heterogeneous Strain States
191	Multi-axial Quasi-static Strength of a Clinched Sheet Metal Assembly
38	Accurate Measurement of High Strain Gradients in Micro-strain Applications With Digital Image Correlation
356	Development of a Test Simulator to Perform Optimized Experiment Design
Delale, F.
13	Effect of Low Temperatures on the Ballistic Limit of Hybrid Woven Composites
14	Ballistic Impact on Woven Glass/Epoxy Composites at High and Low Temperatures
Dempsey, J.F.
106	Temperature Dependent Ductile Material Failure Constitutive Modeling With Validation Experiments
390	Detailed Measurements of Thread Deformation and Failure in Thin Walled Aluminum Alloy Joints
Dennis-Koller, D.
212	Influence of Loading Kinetics on the Shock Response of Polycrystalline Copper.
Destrebecq, J.F.
86	Determination of Stresses in Drying Wood by Means of a Viscoelastic Relaxation Model
DeWald, A.T.
453	Mapping the Triaxial Residual Stress in a Nuclear Reactor Nozzle
268	A Comparison of Residual Stress Measurements on Linear Friction Welds Using the Contour Method and Neutron Diffraction
Diani, J.
104	Role of Viscoelasticity in Predicting the Shape Memory Effect of Polymers
Dickinson, A.P.
52	Use of Vision-based Methods for Measurement of Mechanical Properties of Exhaust Catalysts
Dishovsky, N.
163	Design of Elastomeric Matrix Composites: Influence of the Vulcanizing Agent System and the Temperature of Vulcanization on the Mechanical Properties
Dittmore, A.
441	Measurements of Multistate Folding in a Single Beta-helical Protein
Dixit, N.
328	Deformation Twinning in Pure Magnesium at High Strain Rates
Dixon, J.S.
291	Extracting the Mixed-mode Traction-separation Relations of Chip-Package Interfaces
Dixon, S.A.
434	Extended Storage Behavior of Amorphous Shape-memory Polymers
Dobrev, I.T.
489	Digital Holographic Otoscope for Measurements of the Human Tympanic Membrane in-vivo
490	Design of a Shearography-based Defect Detection System for Structural Health Monitoring
Doghri, I.
53	Non-local Damage-enhanced MFH for Multiscale Simulations of Composites
Dragon, A.
189	Temperature- and Rate-dependent Failure in Dynamically Loaded Viscoplastic Materials
Drapaca, C.S.
206	An Immersed Finite Element Method Approach to Brain Biomechanics
Dreux, K.
136	An Opto-Acoustic Technique for Evaluation of Adhesion Strength of Nano-scale Systems
Dri, F.
325	Mechanics of the Hierarchical Structure of Cellulose Nanocrystals
Drzal, L.T.
176	Impact Behavior of Composite PI/T-joints With Nano-graphene Adhesives
Dubois, F.
397	Experimental Characterisation of Integral Invariants in Wood Specimen Using the Full Field Optical Technique
16	Experimental Results of Green Wood Slice Under Natural Drying
141	Experimental Analysis of the Semi-rigidity Joint in the Standardized Timber Beam
Dulieu-Barton, J.M.
380	Damage Assessment in Composite Materials for Remnant Life Prediction
348	Localised Through-thickness Load Transfer Within Adhesively Bonded Composite Joints
345	Pulse Phase Thermography for the Detection of Kissing Defects
350	Investigating High Strain Rate Behaviour of Foams Using DIC
Dulieu-Barton, JM
444	Compressive Properties of Polymer Foam Materials Using DIC and a Modified Arcan Fixture
Dunn, M.
420	Mechanics and Applications of Light-Activated Polymers
Durr, M.J.
448	Pneumatic Tire Deformation Measurement Using Digital Image Correlation Technique and Finite Element Model Validation
Edelmann, T.A.
484	Surface Micromachined Contact Support Structure for Microswitch Lifecycle Testing
Edmiston, J.K.
324	Synchrotron X-ray Diffraction: Forward Modeling of Intragranular Misorientation Evolution
Efe, M.
276	Visualization of Material Flow in Machining and Sliding Indentation Processes
336	Boundary Layers at Sliding Interfaces
Ekwaro-Osire, S.
375	Uncertainty in the Dynamics of Gear-pair Fatigue and Fracture
Eliasi, R.
24	Delamination Toughness Tests of DCB Specimens Composed of Woven Composites
Emri, I.
379	Generalization of CFS methodology
Engelbach, J.A.
352	Mechanical Properties of Murine Glioma Measured with Magnetic Resonance Elastography
Escobedo, J.P.
212	Influence of Loading Kinetics on the Shock Response of Polycrystalline Copper.
Escobedo-Diaz, J.P.
313	Effect of Temperature on Texture Evolution in Tantalum During Dynamic-extrusion
Espinosa, H.D.
476	Nanoscale Investigations of the Chemo-mechanics of Crosslinking Molecules in CNT Based Nanocomposites
471	Optimal Length Scales Emerging from Shear Load Transfer in Natural Materials and Application to Caron-based Nanocomposite Design
Esselman, T.
459	Digital Image Correlation Measurements of a Nuclear Reactor Containment Dome During a Structural Integrity Test
Fallin, M.
459	Digital Image Correlation Measurements of a Nuclear Reactor Containment Dome During a Structural Integrity Test
Fan, X.
481	Cortical Surface Motion Tracking Using Stereovision
Fan, Z.
181	Dynamic Responses on Lateral Crushing of Sandwich Tubes Under Impact Loading
Fang, J.
147	Digital Volume Correlation for 3-D Deformation Analysis
Farrell, B.
321	Effects of Membrane Composition and Cytoskeletal Proteins on Membrane Mechanics
Feissel, P.
259	Modified Constitutive Relation Error Strategy for Elastic Properties Identification
Ferreira, L.M.P.
99	Production of Metal Matrix Composites Using Thixoinfiltration Techniques
Findeis, D.M.
257	Determining Residual Stresses With the Aid of Optical Interference Techniques
287	Low Cost Digital Shearography Prototype
Fitzpatrick, J.C.
275	Considerations for Numerical Modeling of Dynamic Behavior of Soft Materials
Flores, M.
490	Design of a Shearography-based Defect Detection System for Structural Health Monitoring
Flowers, P. F.
136	An Opto-Acoustic Technique for Evaluation of Adhesion Strength of Nano-scale Systems
Foley, J.R.
332	In Situ Dynamics of Electronics Assemblies Under Shock
Fontanari, V.
46	Very High-cycle Fatigue Resistance of Shot Peened High-Strength Aluminum Alloys
Forquin, P.
496	A Testing Technique to Characterise the Shear Behaviour of Concrete at High Strain-rates
495	Modelling of Damage Mechanisms in Concrete Slabs Under Projectile-impact
Forrestal, M.J.
17	Concrete Penetration With Deceleration Measurements
Foster, D.
150	Viscoelastic Creep of Vertically-aligned Carbon Nanotubes
Foster, J.T.
326	A Priori Pulse Shaper Design for Constant-strain-rate Tests of Elastic-brittle materials
Foster, M.
416	Effect of Loading Rate on the Fracture Behavior of Cortical Bone Material from Human Femur
355	Mode I Fracture Response of Polymer Based Gelatins as a Function of Loading Rate
Foulk, J.
351	Void Growth and Coalescence Investigation in High Strength Aluminum Alloys
Fountzoulas, C.
81	Spinel Modeling Embedded With Small Diameter Surface Transparent Material Particles
Fountzoulas, C.F.
78	Failure Characterization of AA 2024 T3 Panel Subjected to Close-In Blast
82	Material Models Sensitivity of Tungsten-Based Penetrators Impacting on Confined Boron-Carbide
Fourman, V.
24	Delamination Toughness Tests of DCB Specimens Composed of Woven Composites
Fournely, E.
144	Simplified Calculation Method of the Torsion Effect on the Seismic Behavior of Timber Buildings
16	Experimental Results of Green Wood Slice Under Natural Drying
141	Experimental Analysis of the Semi-rigidity Joint in the Standardized Timber Beam
Fredy, C.
104	Role of Viscoelasticity in Predicting the Shape Memory Effect of Polymers
Frei, M.
289	Simultaneous Measurement of Force and Conductance across Single Molecule Junctions
Freire, J.L.F
300	Use of Fiber Optic Strain Gages in Pipeline Specimens Repaired With Composite Systems
Frick, C.P.
424	On the Partially-constrained Recovery of Meth(acrylate) Shape Memory Polymers
Fruehmann, R.K.
380	Damage Assessment in Composite Materials for Remnant Life Prediction
Frye, J.
413	New Insight Into the Toughening Mechanisms of Nacre
Fu, J.
105	Assessment of Corneal Deformation Using Spectral Domain Optical Coherence Tomography and Digital Volume Correlation
Fujigaki, M.
454	Dynamic Shape and Strain Measurements of Rotating Tire in Time-series
Fukuda, N.
139	Improvement of Dynamic Properties of PLLA/PBAT Polymer Alloys Using Dialkylperoxide
Furlong, C.
494	Shape and Deformation Measurements by High-resolution Fringe Projection Methods
501	Opto-mechanical Characterization of a MEMS Sensor for Real-time Infrared Imaging
483	Mapping the Histology of the Human Tympanic Membrane by Spatial Domain Optical Coherence Tomography
489	Digital Holographic Otoscope for Measurements of the Human Tympanic Membrane in-vivo
491	3D Deformations and Shape Measurements of Tympanic Membranes by Multi-wavelength Lensless Digital Holography
490	Design of a Shearography-based Defect Detection System for Structural Health Monitoring
Furmanski, J.
111	Large-strain Time-temperature Equivalence and Adiabatic Heating of Polyethylene
112	Moderate Velocity Ball Impact of a Mock High-explosive
113	Incipient and Progressive Damage in Polyethylene Under Extreme Tensile Conditions
Gabbert, U.
7	Representative volume element analysis of light weight carbon nanotubes embedded piezoelectric fibre composites
Gaffney, J. A.
133	Optical Interferometric Study on Loading Hysteresis
Gair, J.
416	Effect of Loading Rate on the Fracture Behavior of Cortical Bone Material from Human Femur
Gale, J.D.
330	Correlation Between Mechanical Properties And Structural Features In Nanostructured Metals
Gall, K
422	Mechanically-driven Recovery in Shape-memory Polymer Networks
Gall, K.
434	Extended Storage Behavior of Amorphous Shape-memory Polymers
Gallana, I.
323	Size Effects in Biomineralized and Biomimetic Materials
Gao, S.
466	ESPI Photoelastic Measurement of All In-Plane Stress Components
Garbow, J.R.
352	Mechanical Properties of Murine Glioma Measured with Magnetic Resonance Elastography
Gardiner, C.
220	Investigating the Aerodynamic Effects of Flexible Membrane Wings
Garmestani, H.
470	Thermal and Stress Analyses of Dental Ceramic Restorations
Gastl, S.
184	Characterization and Modeling of the Nonlinear Viscoelasticity of Polyoxymethylene in Tension and Compression
Gates, M.
225	High Performance Digital Volume Correlation for Experimental Mechanics Applications
Gates, R.S.
216	High Confidence Level Calibration for AFM Based Fracture Testing of Nanobeams
Gazonas, G.
279	Damage and the Electromechanical Behavior of Piezoelectric Ceramics
Gazonas, G.A.
294	Peridynamic Simulations of Infinite Regions Using a Perfectly Matched Layer
Gdoutos, E.E.
8	Study of Crack Problems by the Optical Method of Caustics
Geers, M.G.D.
405	Enriched Digital Image Correlation to Characterize Geometrically Non-ideal Microbeams
398	Global Digital Image Correlation for Pressure Deflected Membranes
383	Micromechanical Characterization of Ductile Damage in DP Steel
399	Fibrillation Delamination Micro-mechanics in Polymer-metal Interfaces
Geffroy, A.G.
189	Temperature- and Rate-dependent Failure in Dynamically Loaded Viscoplastic Materials
Genin, G.M.
426	The Role of Mineral Content on the Mechanical Behavior Biomimetic Nanofibers
Georgas, P.
131	Simultaneous Measurement of Plate Natural Frequencies and Vibration Mode Shapes Using ESPI
Geraldeli, S.
222	Utilizing DIC to Capture Strains in Dental Applications
Gergesova, M.
379	Generalization of CFS methodology
Geubelle, P.
250	An Experimental Study on the Wave Propagation Behavior in a 2-D Granular Medium
Geubelle, P.H.
337	Molecular Tailoring of Interfacial Adhesion Using Self-assembled Monolayers
Ghangrekar, P.
297	Evaluation of Mechanical Properties of Nano-structured Al6061 Synthesized using Machining
Ghazi, N.
421	Experimental Investigation of Plastic Strain Recovery in Thin Film
Ghosh, P.
194	Indentation and Compression Kolsky Bar Experiments on Microcrystalline and Nanocrystalline Nickel
Ghoshal, A.
71	Application of Sensor Fusion for Structural Health Monitoring of Aircraft Components
Giannadakis, K.
193	Viscoelastic and Viscoplastic Behavior of GF/VE [45/-45]s Laminates
Gibson, R.F.
179	Experimental and Numerical Characterization of Relaxation in Bolted Composite Joints
Gilat, A.
211	Plastic Deformation of Ti-6Al-4V Over a Wide Range of Loading Conditions
254	Dynamic Load Measurement of Ballistic Gelatin Impact Using an Instrumented Tube
Gilormini, P.
104	Role of Viscoelasticity in Predicting the Shape Memory Effect of Polymers
Gimzewski, J.K.
58	High Resolution Atomic Force Microscopy With a Fiber Interferometer
Gimzewski, J.K.G
452	DNA Molecular Recognition Using AFM Nanometrology
Giuseppetti, A
115	Simultaneous Measurement of the Rates of Polymerization Shrinkage and Elastic Modulus Development
Glauvitz, N.E.
488	Etching Silicon Dioxide for CNT Field Emission Device
Gloeckner, P.J.
52	Use of Vision-based Methods for Measurement of Mechanical Properties of Exhaust Catalysts
Gnanamanickam, E.P.
276	Visualization of Material Flow in Machining and Sliding Indentation Processes
336	Boundary Layers at Sliding Interfaces
Godfrey, A.
137	Techniques for 3D Non-destructive Grain Orientation Mapping of Polycrystals
Goldar, D.
49	Measurement of Contact Velocity
Golinval, J.-C.
54	Stiction Failure in Microswitches due to Elasto-plastic Adhesive Contact
Golovin, K.B.
52	Use of Vision-based Methods for Measurement of Mechanical Properties of Exhaust Catalysts
Gomi, K.
136	An Opto-Acoustic Technique for Evaluation of Adhesion Strength of Nano-scale Systems
Goodfellow, J.
479	Tree Biomechanics Measurements Using 3D Photogrammetry
Goodson, J.E.
304	HTHP Hydrolysis Resistance of Thermoplastic PEEK and its Composites
319	HTHP In-Situ Thermomechanical Test Methods and In-situ Properties of High-temperature Polymers and Composites
Gowrishankar, S.
291	Extracting the Mixed-mode Traction-separation Relations of Chip-Package Interfaces
Grady, M.E.
337	Molecular Tailoring of Interfacial Adhesion Using Self-assembled Monolayers
Grange, S.
106	Temperature Dependent Ductile Material Failure Constitutive Modeling With Validation Experiments
Grange, S.J.
390	Detailed Measurements of Thread Deformation and Failure in Thin Walled Aluminum Alloy Joints
Gray III, G.T.
313	Effect of Temperature on Texture Evolution in Tantalum During Dynamic-extrusion
218	Aluminum and Magnesium Alloy Penetration Damage
Gray, III, G.T.
113	Incipient and Progressive Damage in Polyethylene Under Extreme Tensile Conditions
Grediac, M.
59	Applying the Grid Method to Investigate the Mechanical Behavior of Asphalt
Grédiac, M.
60	Application of Full-field Measurements to Analyze the Thermo-mechanical Response of a three-branch rubber specimen
61	Characterization of Mechanical Behavior of Sunflower Stem for Bio-composite Applications
Greenberg, A.R.
434	Extended Storage Behavior of Amorphous Shape-memory Polymers
Grierson, D.S.
283	Characterizing the Wear of Diamond Like Carbon Atomic Force Microscope Probes
Grinfeld, M.
200	Operational Equations of State for Modeling High-rate Phenomena
Griswold, R.
335	Shock Wave Interaction With Periodic Obstacles
Grosch, D.J.
363	A New Technique for Monitoring Inhomogeneous Deformation during Flyer Plate Impact
Grutzik, S.
216	High Confidence Level Calibration for AFM Based Fracture Testing of Nanobeams
Gryzagoridis, J.
257	Determining Residual Stresses With the Aid of Optical Interference Techniques
287	Low Cost Digital Shearography Prototype
Gubbels, W.
462	Residual Stress Generated by a Wire Electronic Dishcharge Machine cut
Guerard, S.
396	Dynamic Characterisation of Nano-Particle Filled Epoxy
Guigou, D
422	Mechanically-driven Recovery in Shape-memory Polymer Networks
Gullett, P.M.
435	Investigation of the Effect of Damage on the Mechanical Response of Salem Limestone at Subjected to Quasi-static and High Rate
Gungor, S.
457	Determination of Local Creep Properties in Weldments
Gunnarsson, C.A.
258	Strain Rate and Pre-twist Effects on Strength of Kevlar Fiber
355	Mode I Fracture Response of Polymer Based Gelatins as a Function of Loading Rate
415	Mechanical Response of Friction Stir Welded Aluminum 2139 as a Function of Loading Rate
370	Fracture Response of Cross-Linked Epoxy Resins as a Function of Loading Rate
416	Effect of Loading Rate on the Fracture Behavior of Cortical Bone Material from Human Femur
Guo, C.
25	Long-range Mechanical Force Enables Self-assembly of Epithelial Tubules
Guo, Y.
276	Visualization of Material Flow in Machining and Sliding Indentation Processes
336	Boundary Layers at Sliding Interfaces
Gurvich, M.R.
23	Probabilistic Characterization of Elastic Properties of Composites Using Digital Image Correlation Technique
Gwinn, K.
264	Dynamic Fracture Toughness Test Using Hopkinson Bar
Haddadi, H.
480	Full-field Strain Measurement Using Microlithography and Image Correlation
Haftka, R.
285	Fabrication and Analysis of Small Flapping Wings
Haghighi-Abayneh, M.
105	Assessment of Corneal Deformation Using Spectral Domain Optical Coherence Tomography and Digital Volume Correlation
Haile, M.A.
71	Application of Sensor Fusion for Structural Health Monitoring of Aircraft Components
Haldar, S
373	Mechanics of Fiber-reinforced Porous Polymer Composites
Hall, R.B.
368	Solutions Applying Sinc Methods for Coupled Diffusion-reaction-deformation Problems in Anisotropic Materials
Hamed, E.
314	Correlation of Multiscale Modeling and Experimental Results for the Elastic Moduli of Cortical and Trabecular Bone
Hammer, J.T.
211	Plastic Deformation of Ti-6Al-4V Over a Wide Range of Loading Conditions
254	Dynamic Load Measurement of Ballistic Gelatin Impact Using an Instrumented Tube
Hammerberg, A.
400	Mechanics of Graphene and Other Two-dimensional Materials
Hanan, J.C
173	Finite Elements Model Generation Based on Stochastic Analysis on AFM Images
Hanan, J.C.
299	Performance Evaluation of a Composite Armor Concept by Ballistic Testing and FEA
267	Nanotomography of Polymer Nanocomposite Nanofibers
214	Inter-cellular Joining for Amorphous Honeycombs
Haney, E.J.
40	A Fresh look at why Does Spinel Outperforms Sapphire During Ballistic Tests?
Haq, M.
511	Comparison of FE and DIC Measurements of a Pi-joint Using Feature Vectors
178	A Study on Damage-induced Behavior of Bonded PI-/T-joints Using Digital Image Correlation (DIC) and FE Modeling
176	Impact Behavior of Composite PI/T-joints With Nano-graphene Adhesives
261	Photoelasticity Testing and FE Modeling of T-Stub Model
Haque, M.
372	Predicting Rate-Dependent Delamination in High Temperature Polymer Matrix Composites Using Multi-Scale Modeling
Harimkar, S.P.
269	Processing and Characterization of Graphene Reinforced Silicon Carbide Nanocomposites
Harrington, E.
501	Opto-mechanical Characterization of a MEMS Sensor for Real-time Infrared Imaging
Harrington, E.J.
490	Design of a Shearography-based Defect Detection System for Structural Health Monitoring
491	3D Deformations and Shape Measurements of Tympanic Membranes by Multi-wavelength Lensless Digital Holography
489	Digital Holographic Otoscope for Measurements of the Human Tympanic Membrane in-vivo
Hartov, A.
481	Cortical Surface Motion Tracking Using Stereovision
Hashemi, A.
98	A Novel Method to Investigate Cell Force Respone
Hassan, A.
386	Fracture Between Short Molecules
Hasseldine, B.
327	Compression After Impact of Thick Composite Sandwich Structures
Hay, J.L.
68	Strain-rate Sensitivity of Nickel by Instrumented Indentation
69	Micron-scale Measurement of the Complex Modulus of gel by Dynamic Indentation
Haynie, W.T.
263	Use of 3-D Digital Image Correlation in the Buckling Test of a Large Cylinder
Hazra, S.S.
510	Quantifying Size Effects in Polysilicon Using an In-situ On-chip Test Platform
Heard, W.
242	Experimental Investigation on Dynamic Behavior of Ultra High Performance Composite Concrete with Kolsky Bar
358	Dynamic Tri-axial Compression Experiments on Cor-tuf
Heath, M.
225	High Performance Digital Volume Correlation for Experimental Mechanics Applications
Heckert, N.A.
237	Tensile Behavior of Single PPTA Fibers Measured by the Kolsky bar Using the Direct Fiber Clamping Method
Hefti, P.
490	Design of a Shearography-based Defect Detection System for Structural Health Monitoring
Helfen, L
251	Feasibility Study of 3D Digital Volume Correlation of Synchrotron Radiation Laminography Data for Displacement Field Measurement During Ductile Crack Initiation
Heltai, L.
206	An Immersed Finite Element Method Approach to Brain Biomechanics
Herzig, N.
47	Ductility of Magnesium Alloys at Quasi-static and Dynamic Loadings
Heyns, P.S.
504	Crack Growth Prediction using the Lefm-based Cracked Beam Element
Hild, F.
83	On the Resolution of Local and Global DIC Approaches
398	Global Digital Image Correlation for Pressure Deflected Membranes
251	Feasibility Study of 3D Digital Volume Correlation of Synchrotron Radiation Laminography Data for Displacement Field Measurement During Ductile Crack Initiation
84	Artifact Correction for DVC Measurements Using A Laboratory X-ray Source
213	CAD-based Calibration of a 3D DIC System
Hill, M.R.
453	Mapping the Triaxial Residual Stress in a Nuclear Reactor Nozzle
268	A Comparison of Residual Stress Measurements on Linear Friction Welds Using the Contour Method and Neutron Diffraction
Hilton, H.H.
265	Viscoelastic Creep Compliance Using Prony Series and Spectrum Function Approach
Hines, M.A.
216	High Confidence Level Calibration for AFM Based Fracture Testing of Nanobeams
Hobson, O.
287	Low Cost Digital Shearography Prototype
Hoefnagels, J.P.M.
405	Enriched Digital Image Correlation to Characterize Geometrically Non-ideal Microbeams
399	Fibrillation Delamination Micro-mechanics in Polymer-metal Interfaces
398	Global Digital Image Correlation for Pressure Deflected Membranes
383	Micromechanical Characterization of Ductile Damage in DP Steel
Hoenigman, M.
479	Tree Biomechanics Measurements Using 3D Photogrammetry
Hojjatie, B.
470	Thermal and Stress Analyses of Dental Ceramic Restorations
Hokka, M.
62	Dynamic Behavior and Numerical Modeling of titanium 15-3-3-3 Alloy
Holmes, G.A.
237	Tensile Behavior of Single PPTA Fibers Measured by the Kolsky bar Using the Direct Fiber Clamping Method
Holzworth, K.
230	Hybrid Polymer Grafted Nanoparticle Composites for Blast-induced Shock-wave Management
228	Milled Glass Reinforced Polyurea Composites: The Effect of Surface Treatment
Hone, J.
400	Mechanics of Graphene and Other Two-dimensional Materials
Honein, E.V.
408	A Thermodynamically-based Models of Time-dependent Material Behavior
Honein, T.
408	A Thermodynamically-based Models of Time-dependent Material Behavior
Hong, Y.
41	Pressure-deformation-injury Maps for Brain Tissue Subjected to High Rate Loading
Hoover, D.
133	Optical Interferometric Study on Loading Hysteresis
Hopkins, M.A.
255	Dynamic Contact Mechanics of Geologic Materials: Experiments, Modeling and Applications.
Horn, G.P.
286	Utilizing Knots to Reduce Dynamic Loads in Fire Service Rope Systems
340	Development and Control of Residual Stresses in Buried Cavities for MEMS Applications
Horstemeyer, M.F.
142	Formulation a Thermomechanical Internal State Variable Constitutive Model for Elastomers
143	Formulation and Validation of a Thermomechanical Viscoelastic/viscoplastic Constitutive Model for Amorphous Glassy Polymer
Hosseinian, E.
210	A Versatile Microelectromechanical System for Fatigue Testing of Nanostructures
Hsueh, C.H.
452	DNA Molecular Recognition Using AFM Nanometrology
Hu, G.
305	A 3D Mechanism-based Constitutive Model for Brittle Materials Under Dynamic Multiaxial Loading
309	Failure Mechanisms in Aluminum Nitride Under Planar Shock Loading
Hu, Z.
427	Comparison of the MPM prediction of Deformation of Polymer Foam in Uniaxial Compression to DVC Measurements
Huang, J.Y.
147	Digital Volume Correlation for 3-D Deformation Analysis
Huang, R.
291	Extracting the Mixed-mode Traction-separation Relations of Chip-Package Interfaces
Huang, X.
137	Techniques for 3D Non-destructive Grain Orientation Mapping of Polycrystals
Hubner, J.P.
110	Determining the Dynamic Response of Luminescent Photoelastic Coating
Hubner, P.
109	A Novel Method to Control Pretension in Membrane Wing Micro Air Vehicles
Hudspeth, M.C.
292	Kolsky Tension bar for Samples With Very low Strength
Huh, H.
320	Micro-tensile Tests of Aluminum Thin Foil With the Variation of Strain Rate
Huh, J.H.
320	Micro-tensile Tests of Aluminum Thin Foil With the Variation of Strain Rate
Humburg, H.
236	Biomimetic Tapered Fibers for Enhanced Composite Toughness
Hung, C.M.
10	Microstructure in the FSW Butt Joint of Aluminum Alloy AA5083
Hurst, A.
400	Mechanics of Graphene and Other Two-dimensional Materials
Huskins, E.L.
302	Microstructure Evolution of UFG Al-1100 During High Temperature Kolsky Bar Experiments
Hwang, C.H.
203	Measurement of Low Level Stress by Integrating Photoelasticity and Spectrometry
Hybertsen, M.S.
289	Simultaneous Measurement of Force and Conductance across Single Molecule Junctions
Ichihara, H.
139	Improvement of Dynamic Properties of PLLA/PBAT Polymer Alloys Using Dialkylperoxide
Ifju, P.
222	Utilizing DIC to Capture Strains in Dental Applications
109	A Novel Method to Control Pretension in Membrane Wing Micro Air Vehicles
220	Investigating the Aerodynamic Effects of Flexible Membrane Wings
Ifju, P.G.
285	Fabrication and Analysis of Small Flapping Wings
Isaacs, J.B.
335	Shock Wave Interaction With Periodic Obstacles
Ishbir, C.
24	Delamination Toughness Tests of DCB Specimens Composed of Woven Composites
Iskander, M.
256	Effect of Grain Size on High Strain Rate Response in Granular Soils
Ito, H.
139	Improvement of Dynamic Properties of PLLA/PBAT Polymer Alloys Using Dialkylperoxide
Izawa, S.
195	Load History Dependency of Plastic Collapse Behavior of Cracked Piping
Jajam, K.
207	Static and Dynamic Fracture Behavior of Glass-filled Epoxy: A study of Nano- vs. Micro-size Filler and Loading-rate Effects
Jarvis, S.
253	Toggling Bistable Atoms via Mechanical Switching of Bond Angle
Jasiuk, I.
314	Correlation of Multiscale Modeling and Experimental Results for the Elastic Moduli of Cortical and Trabecular Bone
Jayakumar, B.
299	Performance Evaluation of a Composite Armor Concept by Ballistic Testing and FEA
214	Inter-cellular Joining for Amorphous Honeycombs
Jeng, Y.-R.
146	The Time Dependent Mechanical Properties of Bovine Enamel
Jenkins, M.G.
130	Experimental and Analytical Evaluation of Structural Integrity of Experiment Container Subjected to Micro-gravity Flight Testing
Ji, S.
481	Cortical Surface Motion Tracking Using Stereovision
Jia, Z.
228	Milled Glass Reinforced Polyurea Composites: The Effect of Surface Treatment
245	Polyurea-based Composites: Ultrasonic Testing and Dynamic Mechanical Properties Modeling
Joffe, R.
128	Nonlinear Behavior of Natural Fiber/bio-based Matrix Composites
34	Characterization and Analysis of Time Dependent Behavior of Bio-based Composites Made out of Highly Non-Linear Constituents
193	Viscoelastic and Viscoplastic Behavior of GF/VE [45/-45]s Laminates
Johansen, R.
459	Digital Image Correlation Measurements of a Nuclear Reactor Containment Dome During a Structural Integrity Test
Johnson, G.
351	Void Growth and Coalescence Investigation in High Strength Aluminum Alloys
Johnson, G.C.
324	Synchrotron X-ray Diffraction: Forward Modeling of Intragranular Misorientation Evolution
Johnson, H.T
340	Development and Control of Residual Stresses in Buried Cavities for MEMS Applications
Johnson, J.A.
87	Development of a Quantitative Mechanical Test of Atherosclerotic Plaque Stability
Johnston, A.A.
371	Composite Joint Research at the National Research Council Canada
Jones, E.
318	In Situ Strain Measurement in Anodes in Lithium-Ion Batteries
Jones, J.
350	Investigating High Strain Rate Behaviour of Foams Using DIC
Jonnalagadda, K.N.
187	Mechanical and Microstructure Studies on SS304LN Steel Over a Wide Range of Strain Rates in Compression
194	Indentation and Compression Kolsky Bar Experiments on Microcrystalline and Nanocrystalline Nickel
Jordan, J.L.
19	Comparison of Mechanical Properties of Polymer-based Multi-Phase Particulate Composites
Jordan, K.
430	Radial Mechanical Properties of Boron Nitride Nanotubes
Joseph, B.D.
478	Evaluation of Surface Preparation Techniques for Composite Bonded Joints
Joshi, P.
393	Energy Dissipation Mechanisms in Nanocomposites Studied via Molecular Dynamics Simulation
Joshi, S.
238	Experiments and Modeling of Microcompression of Single-crystal Magnesium
Justic, R.S.
503	Structural to Multifunctional: Developments in Adaptive and Active Composite and Hybrid Materials
Kaartinen, M.T.
290	Direct Measurements of the Cohesive Behavior of Soft Biological Interfaces
Kaliyanda, A.R.
334	Thermoelastic Stress Analysis of Mechanical Fasteners
Kammers, A.D.
160	Deformation Mapping at the Microstructural Length Scale
Kantorovich, L.
253	Toggling Bistable Atoms via Mechanical Switching of Bond Angle
Kao, P.
419	Time Dependent Recovery of Shape Memory Polymer Composites with Magnetic Particles
Karkkainen, R.L.
66	Nano-Scale Investigation of Microstructural Phenomenon Contributing to Toughening of Nanoparticulate Reinforced Polymers
Kashfuddoja, M.
183	Investigation of Behaviour of Stress Intensity Factors in the Orientation of Crack in Flat Specimens Using Digital Photoelasticity and FEA
Katundi, D.
162	Low Velocity Impact Behaviour of the Epoxy Matrix Composites Reinforced With Metallic and Oxide Particles
99	Production of Metal Matrix Composites Using Thixoinfiltration Techniques
153	Experimental and Numerical Approach to the Phenomenon of High Speed Milling of Titanium Alloy (TA6V)
163	Design of Elastomeric Matrix Composites: Influence of the Vulcanizing Agent System and the Temperature of Vulcanization on the Mechanical Properties
Ke, C.-H.
432	Direct Measurement of the Interfacial Strength of PMMA-CNT Interface
430	Radial Mechanical Properties of Boron Nitride Nanotubes
431	Engineering Radial Deformations in Single-walled Carbon and Boron-nitride Nanotubes
Kelber, S.
159	Mass Spectrometry With Nanoelectromechanical Systems
Kelso, M.
449	Brain Mechanical Imaging (BMI)
Khaja Mohiddin, S.M.
226	Study of Damage Evolution During Fatigue of Composites Using DIC
Khaja, A.A.
334	Thermoelastic Stress Analysis of Mechanical Fasteners
Khandaker, M.
410	Mechanical Characterization of Polyethylene glycol diacrylate (PEGDA) for Tissue Engineering Applications
409	Evaluation of Composite Bone Cement for Orthopedic Applications
Khatibzadeh, N.
321	Effects of Membrane Composition and Cytoskeletal Proteins on Membrane Mechanics
Khayer Dastjerdi, A.
239	Interfacial Fracture Toughness of Nacre
290	Direct Measurements of the Cohesive Behavior of Soft Biological Interfaces
Kiang, C.H.
103	Principles Involved in Interpreting Single-Molecule Force Measurement of Biomolecules
Kiani, M.
411	Using Experimental Data to Improve Crash Modeling for Composite Materials
Kidane, A.
439	A new Approach to Determine the Quasi-static and Dynamic Fracture Toughness of Material
Kikumoto, M.
394	Simple Modeling of Time-dependent Bahavior for Geomaterials
Kim, H.
361	Impact Damage Monitoring in Aerospace Panels via Piezoelectric Rosettes
Kim, H.I.
56	Atmospheric Plasma Treatment of Fiber-reinforced Composites for Adhesive Bonding
Kim, I.H.
337	Molecular Tailoring of Interfacial Adhesion Using Self-assembled Monolayers
Kim, J.H.
237	Tensile Behavior of Single PPTA Fibers Measured by the Kolsky bar Using the Direct Fiber Clamping Method
Kim, J.S.
320	Micro-tensile Tests of Aluminum Thin Foil With the Variation of Strain Rate
Kim, K.B.
166	The Effect of Texture on Superelasticity in Nickel-Titanium
Kim, M.K.
347	Development of Metal-composite Hybrid Bipolar Plate for PEMFC With Co-cure Bonding
Kim, T.
389	High-Loading-rate Energy Capture in Nanoenvironment
Kimberley,
305	A 3D Mechanism-based Constitutive Model for Brittle Materials Under Dynamic Multiaxial Loading
Kimberley, J.
306	Early Stage Damage Propagation in Hypervelocity Impacts on Brittle Materials
King, G.M.
114	A Precision Force Microscope for Biophysics
King, M.A.
41	Pressure-deformation-injury Maps for Brain Tissue Subjected to High Rate Loading
Kingsbury, C.M.
317	Multiscale Modeling of Mechanoresponsive Polymers
Kirchdoerfer, T.T.
363	A New Technique for Monitoring Inhomogeneous Deformation during Flyer Plate Impact
Kirugulige, M.S
448	Pneumatic Tire Deformation Measurement Using Digital Image Correlation Technique and Finite Element Model Validation
Kisailus, D.
346	High Performance Impact-tolerant and Abrasion-resistant Materials: Lessons From Nature
Kjolby, R.K.
452	DNA Molecular Recognition Using AFM Nanometrology
Klusemann, B.
97	Modeling of Sheet Metals With large Grains via Crystal Plasticity
Knauss, W.G.
262	Experimental Investigation of Failure in Viscoelastic Elastomers Under Combined Shear and Pressure
498	Free Volume and Rate/Temperature-Sensitive Yield-like Behavior of Rigid Polymers
Knorr, A.F.
97	Modeling of Sheet Metals With large Grains via Crystal Plasticity
Knorr, D.
370	Fracture Response of Cross-Linked Epoxy Resins as a Function of Loading Rate
467	Rate Dependent Response of Crosslinked Epoxy Networks
Ko, C.C.
391	Time-dependent Mechanical Properties of Hydrogels
Kobayashi, D.
90	Dynamic Thermal Deformation Measurement Technique for Large-scale High Temperature Piping
Kobayashi, M.
364	3D/4D Strain Mapping Using in-situ X-ray Microtomography
Kolluru, P.V.
426	The Role of Mineral Content on the Mechanical Behavior Biomimetic Nanofibers
221	Molecular Weight, Length Scale, and Strain Rate Effects on Necking and Strain Hardening of Polystyrene Nanofibers
Komanduri, R.
11	Effect of Particle Size on the Compressive Behavior of Dry Sand under Confinement at High Strain Rates
Korach, C.S.
465	Measurement of Nanomechanical Properties of a Nanostructured Poly(KAMPS)/Aragonite Composite
464	Combined Effects of Sea Water and UV Radiation on the Mechanics of Fiber Reinforced Vinylester Composites
Kosecki, A.
162	Low Velocity Impact Behaviour of the Epoxy Matrix Composites Reinforced With Metallic and Oxide Particles
Kovalchick, C.
185	Cohesive Zone Law Extraction From an Experimental Peel Test
148	Application of Projection Moire in Electronic Packaging for Warpage Measurements
Koys, T.M.
247	A Full-field Inflation Test Method for Human Skin Tissue
Kraft, O.
208	Hardening Behavior of Thin Wires Under Loading With Strain Gradients
Kramer, S.B.
317	Multiscale Modeling of Mechanoresponsive Polymers
Kramer, S.L.B.
240	Simultaneous Observation of Phase-Stepped Photoelastic Images Using Diffraction Gratings
Kreis, T.
456	Recent Advances in Holographic Strain and Stress Measurement
Krische, M.J
386	Fracture Between Short Molecules
Krishnan, A.
42	New Shear Fracture Test for Mode II Fracture Toughness Measurement
44	Fish-tank Approach to Evaluate Dynamic Failure and Durability of Marine Composites
43	Failure due to Notch and Interface Interaction in Bi-material Joints
Kriven, W.M.
414	Processing, Microstructure, and Properties of Carbon Nanotube Reinforced Silicon Carbide
Kumar, A.
188	Design & Development of Ring Shaped Force Transducers
Kumar, H.
188	Design & Development of Ring Shaped Force Transducers
Kumar, P.
198	Response of Curved Carbon Composite Panels to Shock Loading
Kumar, S.
188	Design & Development of Ring Shaped Force Transducers
Kuokkala, V.-T.
62	Dynamic Behavior and Numerical Modeling of titanium 15-3-3-3 Alloy
Kurath, P.
286	Utilizing Knots to Reduce Dynamic Loads in Fire Service Rope Systems
Kurukuri, S.
278	High Strain Rate Characterization of AZ31B Magnesium Alloy Sheet
Kushvaha, H.V.
205	Effect of Filler Particle Shape on Dynamic Fracture Behavior of Glass-filled Epoxy
Kwon, J.B.
320	Micro-tensile Tests of Aluminum Thin Foil With the Variation of Strain Rate
Kwon, Y.W.
440	Enhancement of Composite Joint Strength Using Nanomaterials
Kyokawa, H.
394	Simple Modeling of Time-dependent Bahavior for Geomaterials
Kysar, J.W.
417	Spatial Distribution of net Burgers Density Vector in a Deformed Single Crystal
400	Mechanics of Graphene and Other Two-dimensional Materials
421	Experimental Investigation of Plastic Strain Recovery in Thin Film
418	Digital Image Correlation (DIC) to determine stress and strain of a nanowire loaded with a MEMS actuator in a Scanning Electron Microscope
Labesse-Jied, F.
140	Stress Intensity Factors for Axisymmetric Problems in Viscoelastic Orthotropic Materials
Lacevic, M.
393	Energy Dissipation Mechanisms in Nanocomposites Studied via Molecular Dynamics Simulation
Lachambre, J.
100	3D Analysis of a Fatigue Crack in Cast Iron Using Digital Volume Correlation of X-ray Tomographic Images
Lacidogna, G.
199	Damage Assessment in Syracuse Limestone Specimens by Frequency Analysis of Elastic Emissions
138	Time Correlation of Acoustic, Electromagnetic and Nuclear Emissions in Rocks Under Compression
121	Absorbed vs. Released Energy in the Cracking Process of Heterogeneous Materials Under Compression
LaCroix, B.
222	Utilizing DIC to Capture Strains in Dental Applications
220	Investigating the Aerodynamic Effects of Flexible Membrane Wings
Lakhera, N.
424	On the Partially-constrained Recovery of Meth(acrylate) Shape Memory Polymers
Lamberson, L.E.
279	Damage and the Electromechanical Behavior of Piezoelectric Ceramics
Lamberti, L.
244	Optical Head as a Gauge Device in Manufacturing
274	Application of Contouring to Dental Reconstruction
246	Optical Fourier Transforms in the Nano Range
123	Recent Developments in the Contouring of Surfaces
Lambros, J.
225	High Performance Digital Volume Correlation for Experimental Mechanics Applications
227	Relating Strain Fields and Microstructural Factors in Fatigue Crack Growth
248	Dynamic Elasto-plastic Contact Behavior of Dimer Granular Pairs
250	An Experimental Study on the Wave Propagation Behavior in a 2-D Granular Medium
Lamell, R
422	Mechanically-driven Recovery in Shape-memory Polymer Networks
Landau, P.
472	Is Adiabatic Shear Failure Really Adiabatic?
Lansdorp, B.M.
329	Magnetic Tweezers With Novel Hg-lamp Illumination Geometry
Lapusta, Y.
140	Stress Intensity Factors for Axisymmetric Problems in Viscoelastic Orthotropic Materials
Larbi, A.
162	Low Velocity Impact Behaviour of the Epoxy Matrix Composites Reinforced With Metallic and Oxide Particles
Lasalvia, J.L.
82	Material Models Sensitivity of Tungsten-Based Penetrators Impacting on Confined Boron-Carbide
Lau, G.
312	Biomimetic Bone: Ceramic Scaffolds With Controlled Porosity
Lava, P.
356	Development of a Test Simulator to Perform Optimized Experiment Design
191	Multi-axial Quasi-static Strength of a Clinched Sheet Metal Assembly
38	Accurate Measurement of High Strain Gradients in Micro-strain Applications With Digital Image Correlation
63	Uncertainty Assessment of DIC Under Heterogeneous Strain States
Lavernhe, S.
213	CAD-based Calibration of a 3D DIC System
Lavernhe-Taillard, K.
213	CAD-based Calibration of a 3D DIC System
Lawrence, W.
298	Impulse Plug Measurements of Blast Reflected Impulse at Close Range
Le Cam, J.B.
60	Application of Full-field Measurements to Analyze the Thermo-mechanical Response of a three-branch rubber specimen
Le Louedec, G.
95	Identification of a Heterogeneous Elasto-plastic law in FSW Welds Undergoing High Strain Rate Loading
Leble, B.
189	Temperature- and Rate-dependent Failure in Dynamically Loaded Viscoplastic Materials
Lee, D.G.
347	Development of Metal-composite Hybrid Bipolar Plate for PEMFC With Co-cure Bonding
Lee, G.H.
400	Mechanics of Graphene and Other Two-dimensional Materials
Lee, J.-H.
333	Laser Generation and Double-exposure Imaging of Hypervelocity Micro-projectiles
Lee, M.Z.
50	Using Stokes Polarimeter for Linear Birefringence and Dichroism in Ferrofluid
Lee, P.V.S.
31	Quasi-static Compressive and Tensile Test on Cancellous Bond in Human Cervical Spine
Lee, S.
312	Biomimetic Bone: Ceramic Scaffolds With Controlled Porosity
315	Bioinspired Fabrication of a Bone-like Composite
Lee, S.J.
41	Pressure-deformation-injury Maps for Brain Tissue Subjected to High Rate Loading
Leemet, T.
62	Dynamic Behavior and Numerical Modeling of titanium 15-3-3-3 Alloy
Legzdina, D.
268	A Comparison of Residual Stress Measurements on Linear Friction Welds Using the Contour Method and Neutron Diffraction
Leifer, J.
88	Camera Synchronization Issues in Videogrammetric Tracking of Position and Acceleration
89	Materials and Techniques for Reduction of Vibration Transmission in String Trimmers
Leigh, S.D.
237	Tensile Behavior of Single PPTA Fibers Measured by the Kolsky bar Using the Direct Fiber Clamping Method
Lenhart, J.
355	Mode I Fracture Response of Polymer Based Gelatins as a Function of Loading Rate
468	Polymer Gels for Defense Applications
370	Fracture Response of Cross-Linked Epoxy Resins as a Function of Loading Rate
Lennon, A.M.
296	Determination of Simple Shear Material Properties of the Brain at High Strain Rates
Leonard, A.
72	Stress Wave Propagation in Highly Nonlinear Two-dimensional Granular Crystals
León-Rodríguez, M.
73	Digital Holographic Microscopy by Mirau Interferometric Objective
Lesman, A.
29	Quantification of Cellular Tractions in a Fibrin Matrix Using 3D TFM
Lessner, S.M.
87	Development of a Quantitative Mechanical Test of Atherosclerotic Plaque Stability
Levesque, M.
492	Micro-Scale Displacement Measurement in Composites Using Hybrid Spectral Image Correlation
Li, B.
12	Effect of Stress Relief Process on Mechanical Performance of MP35N Cable as Lead Conductor in Medical Device
Li, D.
346	High Performance Impact-tolerant and Abrasion-resistant Materials: Lessons From Nature
Li, J.
314	Correlation of Multiscale Modeling and Experimental Results for the Elastic Moduli of Cortical and Trabecular Bone
Li, L.
499	Surface Mechanical and Tribological Behaviors of Silicone-based Hydrogel Materials
Li, Y.
409	Evaluation of Composite Bone Cement for Orthopedic Applications
Liao, H.
156	What Makes Silly Putty© Bounce?
Liaw, B.
22	Thickness Effect on Cross-ply GLARE 5 FML Beams Subjected to Ballistic Impact
13	Effect of Low Temperatures on the Ballistic Limit of Hybrid Woven Composites
14	Ballistic Impact on Woven Glass/Epoxy Composites at High and Low Temperatures
21	Damage Assessments of Ballistic Impact Behaviors of GLARE 5 (3/2) Beams With Various Stacking Sequences
20	Ballistic Impact Behaviors of GLARE 5 Fiber-Metal Laminated Plates
Liechti, K.M.
303	A Thermodynamic State Driven Nonlinear Viscoelastic Constitutive Model
291	Extracting the Mixed-mode Traction-separation Relations of Chip-Package Interfaces
Liew, L.A.
15	MEMS Device for Fatigue Testing 25 Micrometer Thick Aluminum Specimens
Likos, R
422	Mechanically-driven Recovery in Shape-memory Polymer Networks
Likos, R.
434	Extended Storage Behavior of Amorphous Shape-memory Polymers
Lim, J.W.
347	Development of Metal-composite Hybrid Bipolar Plate for PEMFC With Co-cure Bonding
Limodin, N.
84	Artifact Correction for DVC Measurements Using A Laboratory X-ray Source
Lin, J.F.
50	Using Stokes Polarimeter for Linear Birefringence and Dichroism in Ferrofluid
Lin, M.-T.
94	Design and Development of Internal Friction and Energy Loss Measurement on Nanocrystalline Aluminum Thin Films
Lin, T.-W.
340	Development and Control of Residual Stresses in Buried Cavities for MEMS Applications
Lin, W.B.
10	Microstructure in the FSW Butt Joint of Aluminum Alloy AA5083
Lin, W.H.
51	Experimental Testing of Micro-particles Collision
Lin, W.J.
190	High Strain Rate Characteristics of Fiber Bragg Grating Strain sensors
Lin, Y.L.
155	Experimental Study on Dynamic Mechanical Properties of a Mock PBX
223	XDT of a PBX Under Low Amplitude Impact
Liou, N.-S.
146	The Time Dependent Mechanical Properties of Bovine Enamel
145	The Relation Between Crispy and Mechanical Properties of Wax Apple
Lipner, J.
426	The Role of Mineral Content on the Mechanical Behavior Biomimetic Nanofibers
Littell, J.
443	Photogrammetry Measurements During a Tanking Test on the Space Shuttle External Tank ET-137
Liu, C.
453	Mapping the Triaxial Residual Stress in a Nuclear Reactor Nozzle
Liu, H.
170	Equation of State of Detonation Products Based on Statistical Physics
171	Pair Interactions of Detonation Products at High Pressure and Temperature
Liu, H.H.
137	Techniques for 3D Non-destructive Grain Orientation Mapping of Polycrystals
Liu, J.
280	Dynamic Response of Two Polymers under Uniaxial Compression
283	Characterizing the Wear of Diamond Like Carbon Atomic Force Microscope Probes
Liu, J.F.
30	A Miniature Impact Tester for Dynamic Testing of Small Specimens
31	Quasi-static Compressive and Tensile Test on Cancellous Bond in Human Cervical Spine
Liu, P.
409	Evaluation of Composite Bone Cement for Orthopedic Applications
Lo, Y.L.
172	Extracting Optical Properties of a Liquid Crystal Cell by Using Stokes Polarimetry
Long, K.
420	Mechanics and Applications of Light-Activated Polymers
Longere, P.
189	Temperature- and Rate-dependent Failure in Dynamically Loaded Viscoplastic Materials
Losego, M.D.
337	Molecular Tailoring of Interfacial Adhesion Using Self-assembled Monolayers
Lu, F.Y.
155	Experimental Study on Dynamic Mechanical Properties of a Mock PBX
223	XDT of a PBX Under Low Amplitude Impact
Lu, G.
181	Dynamic Responses on Lateral Crushing of Sandwich Tubes Under Impact Loading
169	Molecular Dynamics Simulation on Plastic Deformation of Nanocrystalline Copper
Lu, H.
310	Dynamic Compressive Behavior of Moist Sorted Sand at High Strain Rates
11	Effect of Particle Size on the Compressive Behavior of Dry Sand under Confinement at High Strain Rates
427	Comparison of the MPM prediction of Deformation of Polymer Foam in Uniaxial Compression to DVC Measurements
372	Predicting Rate-Dependent Delamination in High Temperature Polymer Matrix Composites Using Multi-Scale Modeling
Lu, W.
389	High-Loading-rate Energy Capture in Nanoenvironment
491	3D Deformations and Shape Measurements of Tympanic Membranes by Multi-wavelength Lensless Digital Holography
Lu, W.Y.
351	Void Growth and Coalescence Investigation in High Strength Aluminum Alloys
Lu, W.-Y.
57	Preloaded High-rate Tension Techniques
264	Dynamic Fracture Toughness Test Using Hopkinson Bar
Lu, Y.C.
150	Viscoelastic Creep of Vertically-aligned Carbon Nanotubes
Luo, H.
11	Effect of Particle Size on the Compressive Behavior of Dry Sand under Confinement at High Strain Rates
Maji, A.K.
3	Nano-Macro Correlation of Nano-silica Concrete
Makinen, J.
340	Development and Control of Residual Stresses in Buried Cavities for MEMS Applications
Malacara-Hernandez, D.
458	Wavefront Retrieval from Radial Hartmann Patterns
Maloney, C.
85	Blast Overpressure Effects on Bio-mechanical Systems
Manilay, Z.
314	Correlation of Multiscale Modeling and Experimental Results for the Elastic Moduli of Cortical and Trabecular Bone
Manuello, A.
138	Time Correlation of Acoustic, Electromagnetic and Nuclear Emissions in Rocks Under Compression
Mao, J.
474	Cylindrical Bending Model for Adhesively-Bonded Multi-Layered Thick Composite Joints
475	Fracture Characterization of Adhesively-Bonded Composite Joints
Marianetti, C.A.
400	Mechanics of Graphene and Other Two-dimensional Materials
Marin, E.B.
143	Formulation and Validation of a Thermomechanical Viscoelastic/viscoplastic Constitutive Model for Amorphous Glassy Polymer
Marsh, C.P.
414	Processing, Microstructure, and Properties of Carbon Nanotube Reinforced Silicon Carbide
Marteau, J.
480	Full-field Strain Measurement Using Microlithography and Image Correlation
Martin, B.
242	Experimental Investigation on Dynamic Behavior of Ultra High Performance Composite Concrete with Kolsky Bar
358	Dynamic Tri-axial Compression Experiments on Cor-tuf
Martinez, D.T.
218	Aluminum and Magnesium Alloy Penetration Damage
313	Effect of Temperature on Texture Evolution in Tantalum During Dynamic-extrusion
113	Incipient and Progressive Damage in Polyethylene Under Extreme Tensile Conditions
Martini, A.
325	Mechanics of the Hierarchical Structure of Cellulose Nanocrystals
Maslov, J.
25	Long-range Mechanical Force Enables Self-assembly of Epithelial Tubules
Mason, E.
441	Measurements of Multistate Folding in a Single Beta-helical Protein
Mathias, J.D.
61	Characterization of Mechanical Behavior of Sunflower Stem for Bio-composite Applications
Matsubara, M.
195	Load History Dependency of Plastic Collapse Behavior of Cracked Piping
McAllister, A.
148	Application of Projection Moire in Electronic Packaging for Warpage Measurements
McCauley, J.W.
309	Failure Mechanisms in Aluminum Nitride Under Planar Shock Loading
McClung, A.J.W.
241	Relaxation and Recovery Behavior of an Epoxy Based Shape Memory Polymer Resin
McDonough, W.G.
237	Tensile Behavior of Single PPTA Fibers Measured by the Kolsky bar Using the Direct Fiber Clamping Method
McKee, M.D.
290	Direct Measurements of the Cohesive Behavior of Soft Biological Interfaces
McKittrick, J.
314	Correlation of Multiscale Modeling and Experimental Results for the Elastic Moduli of Cortical and Trabecular Bone
312	Biomimetic Bone: Ceramic Scaffolds With Controlled Porosity
315	Bioinspired Fabrication of a Bone-like Composite
McMillan, M.D.
37	Simulation of Interference Fitted Joint Strength as Used in Hot Rolling Work Rolls
McNeill, P.A.
263	Use of 3-D Digital Image Correlation in the Buckling Test of a Large Cylinder
McWilliams, B.A.
67	Particle Size Distribution Effect on the Response of Metal-matrix Composites
Mehdizadeh Rahimi, A.
98	A Novel Method to Investigate Cell Force Respone
Meite, M.
397	Experimental Characterisation of Integral Invariants in Wood Specimen Using the Full Field Optical Technique
Melis, M.
443	Photogrammetry Measurements During a Tanking Test on the Space Shuttle External Tank ET-137
479	Tree Biomechanics Measurements Using 3D Photogrammetry
Merchant, S.N.
491	3D Deformations and Shape Measurements of Tympanic Membranes by Multi-wavelength Lensless Digital Holography
Merkle, A.C.
296	Determination of Simple Shear Material Properties of the Brain at High Strain Rates
Meuris, B.J.
365	Thermal Failure Analysis of PZT Thin Films Using Digital Image Correlation
Meyer, C.S.
360	Adobe Material Parameters for Numerical Simulation of High-velocity Penetration
Meyer, L.W.
47	Ductility of Magnesium Alloys at Quasi-static and Dynamic Loadings
Meyers, M.A.
312	Biomimetic Bone: Ceramic Scaffolds With Controlled Porosity
Min, K.
317	Multiscale Modeling of Mechanoresponsive Polymers
Miraskari, S.M.
438	Deformation & Stability of Nanostructured Metals: A Computational Study
Mishra, B.M.
452	DNA Molecular Recognition Using AFM Nanometrology
Mishra, K.
270	Reinforcement of Epoxy Resins With POSS For Enhancing Fracture Toughness At Cryogenic Temperature
Miyano, Y.
74	Long Term Life Prediction of CFRP Laminates Under Wet Condition
Miyasaka, C.
117	Quantitative Evaluation of the Nano-scaled Polymeric Film System
Mizutani, Y.
344	Nano-structure Inspection by Dual-rotating Mueller Matrix Spectro-polarimeter
Mobasher, B.
4	Experimental Study of Shear Behavior of Kevlar 49 Fabric
2	Optimization of Multi-layer Fabric Model for Engine Fragment Mitigation
Mohammad, N.
471	Optimal Length Scales Emerging from Shear Load Transfer in Natural Materials and Application to Caron-based Nanocomposite Design
Mondal, A.B.
358	Dynamic Tri-axial Compression Experiments on Cor-tuf
Montanez, J.
386	Fracture Between Short Molecules
Moon, R.
325	Mechanics of the Hierarchical Structure of Cellulose Nanocrystals
Mooney, C.
252	Detection of Damage of Epoxy Composites Using Carbon Nanotube Network
Moore, T.Z.
363	A New Technique for Monitoring Inhomogeneous Deformation during Flyer Plate Impact
Morgan, B.A.
56	Atmospheric Plasma Treatment of Fiber-reinforced Composites for Adhesive Bonding
Morgeneyer, T.F.
251	Feasibility Study of 3D Digital Volume Correlation of Synchrotron Radiation Laminography Data for Displacement Field Measurement During Ductile Crack Initiation
Moriarty, P.
253	Toggling Bistable Atoms via Mechanical Switching of Bond Angle
Mortazavi, F.
492	Micro-Scale Displacement Measurement in Composites Using Hybrid Spectral Image Correlation
Mota, A.
351	Void Growth and Coalescence Investigation in High Strength Aluminum Alloys
Motoyama, K.
411	Using Experimental Data to Improve Crash Modeling for Composite Materials
Moutou Pitti, R.
140	Stress Intensity Factors for Axisymmetric Problems in Viscoelastic Orthotropic Materials
16	Experimental Results of Green Wood Slice Under Natural Drying
86	Determination of Stresses in Drying Wood by Means of a Viscoelastic Relaxation Model
141	Experimental Analysis of the Semi-rigidity Joint in the Standardized Timber Beam
144	Simplified Calculation Method of the Torsion Effect on the Seismic Behavior of Timber Buildings
Moy, P.
355	Mode I Fracture Response of Polymer Based Gelatins as a Function of Loading Rate
416	Effect of Loading Rate on the Fracture Behavior of Cortical Bone Material from Human Femur
370	Fracture Response of Cross-Linked Epoxy Resins as a Function of Loading Rate
366	Mechanical Response of Polycarbonate Nano-Silicate Composites as a Function of Strain Rate and Weight Percent of Clay Loading
Mrozek, R.
355	Mode I Fracture Response of Polymer Based Gelatins as a Function of Loading Rate
468	Polymer Gels for Defense Applications
Murasawa, G.
231	Inhomogeneous Twin Nucleation in Polycrystalline Pure Ti under Tensile Loading
Murphy, M.J.
359	Ultra-high Speed Imaging for Explosive-driven Shocks in Polymers
Murthy, H
281	Design of Ultrasonic Probe Configuration Using Finite-difference Time-domain Simulations
Murthy, H.
226	Study of Damage Evolution During Fatigue of Composites Using DIC
297	Evaluation of Mechanical Properties of Nano-structured Al6061 Synthesized using Machining
Murthy, T.G.
276	Visualization of Material Flow in Machining and Sliding Indentation Processes
336	Boundary Layers at Sliding Interfaces
Myers, J.J.
232	Blast Testing of Four Types of Panels With External Strengthening Systems
Na, S.
387	Molecular Adhesion
Na, S.R
386	Fracture Between Short Molecules
Najafi, A.
177	Simulation of Indentation Process in HoneyComb/Qusi-isotropic Sandwich Panels
Nakada, M.
74	Long Term Life Prediction of CFRP Laminates Under Wet Condition
Nakai, T.
394	Simple Modeling of Time-dependent Bahavior for Geomaterials
Nakamura, G.
391	Time-dependent Mechanical Properties of Hydrogels
Nakamura, T.
70	Composite Damage Detection With Self-Sensing Fibers and Thermal Sprayed Electrodes
Nakamura, T.N.
512	Interfacial Fracture Toughness and Residual Stress of Thermally Sprayed Coatings
Nanbara, K.
90	Dynamic Thermal Deformation Measurement Technique for Large-scale High Temperature Piping
Nansteel, M.
201	Experimental Characterization and Modeling of the 2024-T3 Aluminum Alloy Under Close-In Blast Loading
Nansteel, M.W.
298	Impulse Plug Measurements of Blast Reflected Impulse at Close Range
78	Failure Characterization of AA 2024 T3 Panel Subjected to Close-In Blast
Nantasetphong, W.
245	Polyurea-based Composites: Ultrasonic Testing and Dynamic Mechanical Properties Modeling
Naraghi, M.
476	Nanoscale Investigations of the Chemo-mechanics of Crosslinking Molecules in CNT Based Nanocomposites
Nassar, S.A.
474	Cylindrical Bending Model for Adhesively-Bonded Multi-Layered Thick Composite Joints
475	Fracture Characterization of Adhesively-Bonded Composite Joints
354	Fastening and Joining of Compsites
Neggers, J.
398	Global Digital Image Correlation for Pressure Deflected Membranes
399	Fibrillation Delamination Micro-mechanics in Polymer-metal Interfaces
Neggers, N.
405	Enriched Digital Image Correlation to Characterize Geometrically Non-ideal Microbeams
Nelson, D.V.
152	Review of Methods for Determining Residual Stresses in Biological Materials
Nelson, K.A.
333	Laser Generation and Double-exposure Imaging of Hypervelocity Micro-projectiles
Nemat-Nasser, S.
245	Polyurea-based Composites: Ultrasonic Testing and Dynamic Mechanical Properties Modeling
228	Milled Glass Reinforced Polyurea Composites: The Effect of Surface Treatment
230	Hybrid Polymer Grafted Nanoparticle Composites for Blast-induced Shock-wave Management
335	Shock Wave Interaction With Periodic Obstacles
Nemoto, M.
346	High Performance Impact-tolerant and Abrasion-resistant Materials: Lessons From Nature
Nguyen, S.T.
476	Nanoscale Investigations of the Chemo-mechanics of Crosslinking Molecules in CNT Based Nanocomposites
Nguyen, T.D.
424	On the Partially-constrained Recovery of Meth(acrylate) Shape Memory Polymers
406	Full-field Inflation Experiments of Soft Fibrous Tissues
422	Mechanically-driven Recovery in Shape-memory Polymer Networks
316	Using Dynamic Inflation Experiments to Study Ocular Blast Injuries
165	Exploiting the Glass Transition for Shape Memory Programming in Polymers
247	A Full-field Inflation Test Method for Human Skin Tissue
Ngwangwa, H.M.
504	Crack Growth Prediction using the Lefm-based Cracked Beam Element
Niania, M.
156	What Makes Silly Putty© Bounce?
Niccolini, G.
138	Time Correlation of Acoustic, Electromagnetic and Nuclear Emissions in Rocks Under Compression
199	Damage Assessment in Syracuse Limestone Specimens by Frequency Analysis of Elastic Emissions
Nicolas, M.J.
436	Structural Response of a Carbon-Composite Wing using Fiber Bragg Grating
Nie, X.
292	Kolsky Tension bar for Samples With Very low Strength
168	Inertia Effects in High-rate Compression Experiments of Soft Materials
Ning, J.F.
87	Development of a Quantitative Mechanical Test of Atherosclerotic Plaque Stability
Niordson, C.F.
421	Experimental Investigation of Plastic Strain Recovery in Thin Film
Nishida, E.E.
326	A Priori Pulse Shaper Design for Constant-strain-rate Tests of Elastic-brittle materials
Nishida, M.
139	Improvement of Dynamic Properties of PLLA/PBAT Polymer Alloys Using Dialkylperoxide
Noels, L.
53	Non-local Damage-enhanced MFH for Multiscale Simulations of Composites
54	Stiction Failure in Microswitches due to Elasto-plastic Adhesive Contact
Nokes, J.P
56	Atmospheric Plasma Treatment of Fiber-reinforced Composites for Adhesive Bonding
Notbohm, J.
29	Quantification of Cellular Tractions in a Fibrin Matrix Using 3D TFM
Novitscaya, E.E.
315	Bioinspired Fabrication of a Bone-like Composite
Novitskaya, E.E.
312	Biomimetic Bone: Ceramic Scaffolds With Controlled Porosity
314	Correlation of Multiscale Modeling and Experimental Results for the Elastic Moduli of Cortical and Trabecular Bone
Nyström, B.
34	Characterization and Analysis of Time Dependent Behavior of Bio-based Composites Made out of Highly Non-Linear Constituents
o,
311	Optimized Calibration for Single-molecule Instruments
Obstalecki, M.
286	Utilizing Knots to Reduce Dynamic Loads in Fire Service Rope Systems
O'Daniel, J.
116	Discrete Modeling of Penetration Into Ultra High Performance Concrete
Ogawa, M.
70	Composite Damage Detection With Self-Sensing Fibers and Thermal Sprayed Electrodes
Ohlson, N.G.
101	Classical Optical Interferometry for Strain Measurements
Okajima, Y.O.
512	Interfacial Fracture Toughness and Residual Stress of Thermally Sprayed Coatings
Oliver, S.T.
443	Photogrammetry Measurements During a Tanking Test on the Space Shuttle External Tank ET-137
Olson, M.D.
453	Mapping the Triaxial Residual Stress in a Nuclear Reactor Nozzle
Omidvar, M.
256	Effect of Grain Size on High Strain Rate Response in Granular Soils
On, T.
248	Dynamic Elasto-plastic Contact Behavior of Dimer Granular Pairs
Orikasa, S.
231	Inhomogeneous Twin Nucleation in Polycrystalline Pure Ti under Tensile Loading
Orock, A.
410	Mechanical Characterization of Polyethylene glycol diacrylate (PEGDA) for Tissue Engineering Applications
Ortega, A.M.
434	Extended Storage Behavior of Amorphous Shape-memory Polymers
422	Mechanically-driven Recovery in Shape-memory Polymer Networks
Osovski, S.
472	Is Adiabatic Shear Failure R